Anchor chain weaving: types of weaving and photos

Anchor weaving is a find of ancient jewelers. With its help, the first chains of precious metals were created. The rounded links were connected to each other at an angle of 90°. Over time, the craftsmen's products became more complex and fanciful: the geometric shapes of the links changed, their unconventional combinations were created, and new types of sections appeared. Many modern jewelry masterpieces are based on ancient chain weaving. The anchor grip of the links adds to their charm. With the help of such jewelry you can create original and fresh images. Before we look at the non-standard subtypes of weaving, let's figure out what its traditional version is.

The emergence and use of knitting by jewelers

So anchor weaving appeared on its own, without involving the imagination of jewelers. Rather, it was borrowed from maritime activities, where the anchor chain had approximately the same appearance. Since those times, the technology for making such a product has not changed at all, the links are connected in the same order, only variations on the theme of knitting have appeared, and sometimes the shape of the links changes.

Anchor weaving

The essence of this type of knitting is that the links are sequentially connected to each other at a perpendicular angle. Jewelry made using this technology is durable and suitable for any gender. Since anchor products have a simple look, they are often bought for children.

The links have the same dimensions, and the product itself can be manufactured in the following ways:

Hand knitted. The task of the chain maker is to cast an elongated wire from gold, which is subsequently divided into several dozen identical parts. Next, the master bends each piece individually with a special device and weaves the product. Thus, the links are connected manually one by one. True, now this particular type of chain weaving is rarely ordered from craftsmen.
Machine knitting. This method of making jewelry is a little cheaper, but the essence remains the same, and the process is controlled by a machine. Therefore, the chain turns out to be more symmetrical and neat.

The filling of the anchor chain can also be different. In one case, the jewelry will be filled with gold of the same standard, and in the other, the links will be hollow. The volume of the links allows the buyer to choose whether they are full or hollow. Filled links are more durable and are also easier to repair if the chain or bracelet breaks. Soldering a break in a filled anchor chain is simple and invisible to outsiders. But you won’t be able to cope with a hollow product; you’ll have to lose several links.

In addition, hollow products are more fragile and more likely to break. Do not forget that a filled anchor chain is quite heavy in weight, so it will cost more than a hollow analogue. To reduce the cost of the product, you can order or purchase gold-plated jewelry. It will be the same in appearance. It’s just that from time to time the chain will fray, and the gilded ball will have to be restored. In general, anchor chains and other products fall into the mid-price category.

Anchor weaving is great for those who do not know the size of the jewelry and are taking it as a gift. Because it is quite easy to pull out several links to shorten the product. You can also add links, which are purchased to order from a jeweler, to a finished piece of jewelry to increase the length.

Don’t forget that anchor weaving is suitable for any pendant or pendant. The main rule of style is that the knitting of a chain or bracelet does not distract attention from the pendant. Fancy chains or armored weaving already attract attention in themselves and are independent chains. But anchor jewelry, like no other, is suitable for complementing with a pendant.

Anchor weave chain

It even sometimes happens that without an additional element, anchor weaving looks unfinished and discreet. It is quite discreet, so it is suitable for adding religious symbols, for example, a cross. You can order pendants of different sizes for anchor weaving. The main thing is that the eye of the pendant goes into the volumetric chain. This will require preliminary fitting. Even massive pendants will not look tacky.

Anchor chain weaving - a classic of jewelry craftsmanship

Today there are more than 50 ways to fasten decoration elements. The anchor type corresponds to its name: the weaving resembles a chain on which a ship’s anchor is attached. In the classical representation, all elements are the same size, oval in shape and connected to each other sequentially and perpendicularly. This product is easy to care for because dirt does not get stuck in the fasteners. Once upon a time, this method became a real breakthrough in jewelry. It was an indicator of the quality, strength and elegance of the metal.

Rich and noble people tried to purchase such accessories, as they were confident in their durability.

"Moscow beat"

The “Moscow bit” weaving is of particular interest. It combines a classic anchor and elements unusual for this type: additional curved links connected to oval ones. Thanks to their unconventional shape, massive appearance and their name, such jewelry is positioned as a symbol of wealth and luxury for residents of megacities. A gold chain will help emphasize the status and wealth of its owner. Anchor weaving “Moscow bit” is one of the few techniques that are used to make purely men’s jewelry.

Varieties of classic weaving

The traditional version has many variations. One of them is the “1+1” anchor weave. It differs from the classic one in the more elongated shape of the links, which are approximately twice as long as the traditional ones. In “1+2” weaving, the links alternate. The first number indicates the number of standard elements in the combination, the second – the number of elongated ones. Thus, first there is one short link, then two long links, then a short link again, and so on. Variations can be very different, for example “5+1”. This variety involves serial connections of five ordinary elements, interspersed with short links. What else could an anchor chain weave be?

"Rollo"

Subtypes of anchor weaving may differ from each other in the shape of the links. Classic oval shapes are competing with non-traditional round ones. Such links are typical for rollo weaving. It is also called "belzer" or "chopard". The last name is used especially often. And there are reasons for this. Once upon a time, models with round links were in the collections of the Swiss fashion house Chopard. It was he who made this anchor chain weaving truly popular. A photo of a product made using the Rollo technique is presented below.

There are straight and twisted “rollo”. Links in chains can be narrow or wide.

Chain weaving technologies

The production of metal chains can be carried out in three ways:

manual;
machine;
stamping.

During the stamping process, the links are threaded into each other rather than soldered. Such a product breaks and deforms faster. Machine technology allows the production of thin, durable models with a link thickness of less than 1 mm. Some types of weaving can only be done by hand. The master cuts a spiral of gold or silver wire into rings of the same diameter and fastens them together, and then solders them. A specialist can make different patterns manually, for example, double anchor weaving is a very popular option.

"Italian Bismarck"

The most voluminous jewelry is created from two classic anchor chains at once. Their links are soldered to each other and form a wide woven ribbon. Two chains combined into one are often called the “Italian Bismarck”. This weaving allows you to create luxurious bracelets and chic chains. The width of the products varies. Several chains can be soldered into one at once.

Features of choosing jewelry

The white gold chain around the neck in an anchor style is not only woven in one row. To give the product a special charm and uniqueness, it is made in two, three and even four rows.

Regardless of the type of weaving, each neck decoration comes in two types:

Solid chains, completely filled with metal, are reliable and resistant to external influences. You can wear them for a long time without worrying about their safety.
Hollow jewelry harmoniously combines lightness and volume. They are elegant and more fragile compared to one-piece models, so it is better to take them off at night and not let children wear them. To make the product sparkle more, it is made with a diamond cut on the outer and inner sides.

When choosing an anchor weave for a gold chain, you need to take into account some nuances, including the complexion:

Narrow jewelry with thin and graceful elements is suitable for slender people.
Women with large figures are recommended to wear voluminous accessories with large links.
Girls with long necks prefer to wear short chains with thin links.
Those with a short neck should pay attention to long chains. They visually correct the proportions.
For girls, a light product with elegant elements would be a good option.
As for the length of the women's chain, its most universal option is 45-50 cm.

When choosing jewelry, it is important to rely on your taste and personal preferences. The right choice will be jewelry that will suit a certain image and style of clothing. It should be remembered that pendants and medallions add weight to the chain. A product with pendants wears out faster and may break. The most durable options are armored and classic anchor weaving. These chains are ideal for wearing a cross or pendant.

Anchor "knocked together" weaving

Jewelry lovers have an incredibly wide selection of jewelry to choose from. It is worth paying attention to chains and bracelets of anchor “knitted” weave. Their links fit tightly to each other, leaving only minimal gaps between them. Such chains look more impressive and voluminous than traditional ones. Thin links will make jewelry made of precious metal a charming piece of jewelry for ladies. A chain made of massive elements will undoubtedly look great on a man’s neck or hand.

Varieties of techniques

In addition to the basic technique, the anchor weaving pattern continues to evolve. Several varieties have appeared that diversify the product. Among them are:

Double anchor. This technology is not too different from conventional weaving. The whole point is that each link doubles. That is, instead of one ring, two are threaded into the next link. The technique was created to add volume to the chain.
"Rollo." A method in which the chain links are round in shape (in the classic version they are oval). This technique was developed by the fashion house Chopard. That's why she is often called "Chopard" now.
“Garibaldi” is the name of the technique, derived from the surnames of two spouses who were inseparable. And the technique itself is similar to making “Rollo”, only in this case the ring-links are double.
But not only standard options can be made based on the anchor technique. There are also fantasy chains, their names: “Hawaiian”, “Aurora”. This is a more complex technique that is often used for women's products.

Depending on the type of anchor weaving, you can choose the length and thickness of the product. There are no restrictions. The shortest option is 40 centimeters, the product will be located around the neck. And the long chain reaches 60–70 centimeters and the lower neckline on the body.

The anchoring technique can be improved with the help of coatings. Of course, a gold-plated chain will cost less, but the coating will wear off over time. The process happens faster if the chain rubs against your neck and you wear it constantly. But if the master wants to protect the product from scratches or abrasions, he can apply a layer of rhodium, which will not spoil the appearance of the jewelry. Diamond coating is responsible for giving the chain additional shine. It is this that ennobles the chain.

Gold bracelet anchor weave

The strength of the technique is quite high, however, the links can break and fall out. To ensure that this happens as rarely as possible, you should inquire about the quality of the product before purchasing. Don't forget to check all the certificates that confirm the quality and skill of the jeweler. Inquire about the strength of the alloy.

Gold chains are made from 585 or 830. For this technique, using a higher-grade alloy is dangerous because gold is a soft metal that is prone to deformation. And 585 standard is durable and will last for many years.

If possible, purchase only filled chains. They are easy for a master to care for and repair. Hollow links are difficult to repair if cracked or broken. Don't forget to pay attention to the castle. The more massive the product, the stronger it should be, for example, a carbine. But for thin jewelry options, a springel is quite suitable.

The choice of chain and weave depends on your taste, as well as the purpose of use. This chain has already become a true classic at a reasonable price. It will never spoil your style, and it will not be called tasteless. Anchor style weaving goes well with other accessories and decorations, but it is advisable that they are made of the same type of metal.

What are anchor chains worn with?

Some varieties of anchor weaving look self-sufficient, but in general such chains are well suited for wearing various pendants and pendants. Since a chain is a decoration and an accessory, its wearing is largely determined by a person’s overall style. They also differ in processing. Women's gold chains of anchor weave often undergo diamond cutting - processing with a special tool with diamond cutters, due to which the product acquires a beautiful shine and shine. Male models, on the contrary, are rough and simple. For silver, black rhodium plating, silver plating, gold plating or oxidation can be used.

When choosing a pendant for an anchor chain, take into account its weight - it should be at least twice as light, otherwise the links may deform under the weight and even break apart.

"Garibaldi"

There is also a "double rollo". It is distinguished as a separate subspecies of anchor weaving and is called “garibaldi”. The history of the name goes back to memorable historical events that occurred in Italy in the 19th century, when the country was under Austrian yoke. Giuseppe Garibaldi fought for the liberation of his homeland. In honor of the national hero of Italy, weaving got its name. Chains made using this method look solid. They, like Bastille weaving products, belong to purely masculine jewelry.

We take into account the nuances

The weaving of such products consists of connecting chain links together. To choose the most suitable option for such decoration, it is advisable to take into account several important nuances in the process:

Gender of a person. There are both female and male types of weaving. When purchasing jewelry of this kind, you need to consider who it is intended for.
Age. Stylish and original models are considered a good option for young people. For older people, it is recommended to purchase conservative and laconic jewelry.

Wearing method. The weave of the product on which it is planned to wear a pendant or other accessory of this kind in the future should not have excessive dimensions or stand out with an unusual pattern. This is necessary in order to place the main emphasis on the main attribute of the decoration. If you plan to wear the chain as the main decoration, you can safely choose massive options that feature original weaving.

Variations on the theme of anchor weaving

Even anchor knitting has its own variations. This suggests that the type of weaving is developing and acquiring new colors. Common variations include:

Marine gold chain. Of course, at first glance, it may seem that these are the same thing. But in jewelry, and even in maritime affairs, chains look different. The thing is that the marine chain has jumpers in the links in the middle. This helped the sailors, since the chain did not get tangled and the links did not rub against each other. The jewelers also liked the idea and implemented it into a piece of jewelry. A chain with jumpers looks more complete, is great for both men and women, and does not require an additional pendant.
Double and triple anchor. The essence of weaving is the same, only several links are used that are connected to each other. Thus, the decoration becomes more massive and voluminous.
Rollo or belzer is a type of anchor weaving that is made from round links. It is also universal, suitable for pendants. This weaving is also called Chopard, in honor of the fashion house of the same name that produces such jewelry.
Garibaldi or double rollo - this variety is named after the Italian family who were inseparable until death and went through all the trials of life. Another name for mating is Italian. It consists in the fact that instead of one ring, two are connected at once in a link. Each link is a forked ring. The Italian is more preferred by women because the chain has an original design.
Venetian weave or Venetian weave is also a common type of jewelry design. A modification of anchor knitting consists of using square or rectangular links. Of course, the chain looks more strict, but this also gives it a certain charm. And the products themselves are more suitable for men. The chain can be made either massive or more fancy.
Cord weaving belongs to the group of anchor weaving. According to the technology, several links are connected at once by jumping over 2-3 links. The products are often found in jewelry stores and have a twisted shape, so from a distance they do not at all resemble a simple type of knitting.

Jewelers tried to add fantasy to this knitting technology. Among the resulting options, “Aurora” and “Hawaii” stand out. In them, round links are connected to each other, several pieces at a time. Therefore, the chain turns out to be as voluminous as possible, almost round. This variety is worn as an independent decoration without a pendant.

Anchor chains and bracelets are made from mainly 585 gold. This sample is the most reliable; if the gold content is higher, then such a chain will deform over time under the weight of the weight. And medium samples keep their shape optimally, their appearance does not change over time.

There are almost no defects in anchor weaving and its varieties; the links are large and can be seen with the naked eye. The clasps of such products also do not require special attention, since any of them can withstand the load of the weight of the jewelry.

Of course, anchor weaving appeared first, so it is now difficult for them to surprise and express individuality. But sometimes, when choosing a gold chain or bracelet, you want to choose the most practical and at the same time stylish option. For such cases, anchor weaving and its varieties are perfect.

"Venetian weaving"

Products made using the Venetian weaving technique will look luxurious on both men and women. Unlike the classics, its basis is not round, but rectangular or square elements, which make this chain weaving original. The anchor connection of the wide links is quite strong. Handcrafting such a product is hard and painstaking work. Only an experienced master can perform it. Depending on the number of links in the block, double and triple “Venetian” are distinguished. It can be straight or curved.

Chains made of yellow and white gold with “Anchor” weaving (with photo)

Gold chains with “Anchor” weaving use the simplest technology for fastening links. In such products, one link is located perpendicular to the other. This pattern's structure resembles a real ship's chain.

Jewelry made in a classic style has an oval shape of link rings. But products with elongated parts are also very popular.

Look at an example of elongated links in a gold chain with “Anchor” weaving in the photo:

Products made of white and yellow gold with a similar pattern can be made using stamping, machine knitting or manually. A master jeweler does not need to put a lot of effort into making a piece of jewelry. But for handmade chains the price is much higher than for those products that are made by machine or stamping. The last two technologies are not an indication that the chain will look or wear worse than handcrafted items.

It is “anchor” chains, like jewelry in the Bismarck style, that are considered to be one of the most durable and unpretentious. The items are very easy to care for: they are not difficult to wash, since the jewelry does not consist of intricately woven links.

But there is one nuance: when choosing a chain with such a twist, you need to carefully examine its lock. At first glance, it should not raise any doubts in the buyer. You need to make sure that the fastening mechanism is strong enough.

“Anchor” knitting is universal: it is suitable for both men and women. Who will wear the chain depends on its length and thickness.

The big advantage of such jewelry is that they go well with other jewelry. This is very important because many people are used to wearing gold chains with rings, bracelets or pendants. Due to its external simplicity, chains with an “Anchor” pattern look great with a variety of pendants. You just need to pay attention to the size of the pendants so that they visually match the thickness of the chain itself.

Very often, godparents give chains made in silver or white gold with “Anchor” weaving to their wards before the baptism ceremony.

"Sea Anchor"

The “Sea Anchor” technique deserves special attention. The links of a chain made in this way have jumpers. Due to this feature, this subtype is almost identical to the weaving of a real anchor chain used on large ships. After all, jumpers in jewelry elements are like buttresses, spacers that prevent its deformation. Such a striking similarity gave rise to the name of weaving. Thanks to the crosspieces, jewelry made using the “Sea Anchor” technique is considered one of the most durable. They are made from different precious metals. However, the silver chain has the greatest charm. Anchor weaving with bridges made from this metal really brings to mind long-distance voyages.

Which gold chain weave is the strongest?

Today the pace of life is so crazy that it is simply necessary to know which weave of gold chains is the most durable!

The first place in the reliability rating is deservedly occupied by the Bismarck knitting. When other jewelry is torn and lost, this powerful giant will withstand the onslaught of daily hassle with dignity.

The second position is firmly occupied by “Anchor” weaving, which is so popular in the manufacture of modern precious items. If you can find a chain with a double row of links, then no sea or land winds will be afraid of it.

The third place was won by the “Shell” knitting. All connoisseurs of comfortable and practical things, as well as adherents of the classics, will definitely like jewelry in this style.

Already familiar to many, “Fox Tail” took fourth place in the ranking. The male half of humanity needs to take a closer look at this option.

In the fifth position are gold chains with “Triplet” weaving, as in the photo. In appearance, they resemble a rope twisted into a bundle.

Classic version

Classic anchor weaving involves oval links connected to each other at right angles. Jewelry created this way is quite durable. But it is worth considering that even one link made poorly can lead to rapid rupture of the product, and in the worst case, to its loss. Classic anchor chain weaving is the simplest of all, so jewelry made in it will not cause trouble when caring. Jewelry has a certain romantic aura. In appearance, they resemble anchor chains, which are used on heavy ships plowing the sea. This striking association gave the technology its name. The anchor weave of the gold chain looks especially impressive. A photo of the model is presented below.

Automated anchor weaving process

There is a machine weaving technology. This way you can make a thinner chain, but the product will be valued lower than that made by a master jeweler. It should be understood that not every chain can be made by machine. Spiral machines are widely used, the main elements of which are a needle and a spiral former, powered by an electric motor.

The machine makes a link that moves, turns over and threads onto the next one with tweezers. The operation is quite simple, but very small, since one link in diameter can be only a couple of millimeters. An important condition for anchor weaving is that all links must be perfectly even and indistinguishable from each other. The machine not only allows you to achieve this perfectly, but also achieve high productivity.

Multi-link anchor chain weaving is an even greater art. Triple and quadruple products are in great demand, and few people know that making them is really not easy. According to technology, several others must be inserted into each link. It is almost impossible to make such a product by hand, and even with a small diameter.

As for modern machines, a symbiosis of mechanical precision and compressed air power works here.

Thanks to a special system, air is supplied strictly to the stringing point. In order for the link to move to the desired point, the air flow directs and blows it away.

Another effective automatic method for manufacturing products is a crimping machine. Both gold and silver are often used in this type of weaving. The system is such that there is a wire on which the finished link is strung. Then it is cut off, crimped and grabbed with tweezers.

The described process is then repeated. The crimping machine produces round links, which cannot be achieved with the machine described above. Moreover, each link is exactly the same as the previous one, which makes it possible to produce a perfectly straight and beautiful chain.

The pattern of a chain made on a spiral machine, despite the same weaving technology, will be different from that made on a crimping machine.

To make a chain, it is not necessary to use the most ordinary wire; you can take a shaped one and make an even more interesting and beautiful thing. The wire can be cut in a square or semicircle; you can weave a chain from a flat material. The links can even be made of different alloys, alternating in the finished product - for this, several units are added to the machine.

However, there is a fly in the ointment in such a barrel of honey as modern and technologically advanced jewelry machines. Thus, the quality of the link may decrease due to the fact that a good and dense fugue is quite difficult to achieve with the technologies currently available to jewelers - the powder used in the manufacture of the chain penetrates into the composition.

Another difficulty is creating chains with complex links, and this affects the level of complexity of the work as a whole. Practice shows that spiral machines are used much more often than any other types of jewelry machines.

High-tech modern anchor chain weaving allows you to get a fairly inexpensive piece of jewelry.

A silver chain of anchor weave can be found in the jewelry box of almost any modern woman, be it a student, a middle-aged lady with impeccable taste, or an older woman who knows exactly how and where to spend money.

When choosing an anchor weave, a person pays tribute to the imperishable classics and can rest assured that the purchase will last a long time and will not disappoint him. Moreover, if such a chain accidentally falls into the hands of a small child, it will not break - such is the strength of the anchor weave.

How to check the quality of weaving?

Both a machine-knitted chain and a handmade product can be defective - no one is immune from error. Of course, jewelry of poor quality can be returned to the store, but it is better to check its reliability before purchasing. So, you have chosen a chain with a certain weave. Gently pull it between your fingers and take a close look at the links and their connections.

The elements must be the same in size and shape. Of course, we are talking about types of weaving that use the same links. If the knitting technology assumes that the links should be of different lengths and shapes, then take this into account - compare different sections of the chain in which the pattern is repeated.
Touch the surface of the links with your fingers and run your hand along the entire chain. The rings should be evenly polished and there should be no uneven or scratchy elements.
Turn the chain in your hands - the links should not get stuck or sink.

We also recommend that you evaluate the reliability of the lock before purchasing jewelry. Open and close it several times - the mechanism should work flawlessly.

Guide to types of neck jewelry

Collars and chokers are the shortest neck jewelry. The accessory should fit snugly against the neck, but not squeeze it or cut into the skin. The difference between a collar and a choker: the first covers the neck, and the second is adjacent to its base.

A necklace is a piece of jewelry with decorative elements located at the base of the neck. There are solid and sectional, cast and soft. A necklace is an ideal accessory and option for a relaxed casual style.
Necklace - differs from a necklace by the protruding central part of the jewelry. They are rigid and flexible.
A chain is one of the most popular and versatile accessories. Can be worn as an independent decoration, paired with a pendant or cross, or by combining several chains.
The cord is the basis for pendants, crosses, amulet and medallions. Can be made of leather or rubber.

Anchor weaving (silver and gold) - a current trend

Since ancient times, anchor chains made of gold and silver have been the most sought-after jewelry. The strict simplicity of weaving products from precious metals favorably emphasizes the status, wealth, and good taste of its owners. Jewelry can be subtle and elegant, massive and powerful.

Essentially, anchor chains are a unisex style. Among the unprecedented variety of jewelry creations, both men and women can easily find products that suit them. Chains, depending on their thickness, can be used to wear pendants, pendants, crosses, and also as independent jewelry. Thanks to its versatility at all times, products created using anchor weaving technology will have their fans.

How to choose a necklace based on your appearance type

Attention: all advice is of a recommendatory nature! You must make the final decision based on your own taste, clothing style and preferences. The main rule is that decoration should emphasize the dignity of the figure, and not violate its proportions.

How to choose jewelry by height

Below 165 cm - jewelry with a length of 40 to 50 cm.
165 cm - 170 cm - choose jewelry of any length.
From 170 cm - jewelry with a length of 55 cm.

Decoration according to body type

Overweight women should avoid jewelry at neck or chest level. Focus on a length of 45 cm. Thin chains 50-55 cm long suit petite, thin girls.

Jewelry according to face shape

Square face shape. Choose vertical decorations with an elongated shape.

Round face. The jawline is lengthened by accessories from 55 cm. Focus on long elongated accessories, elegant chains with drop-shaped pendants.

Triangular face shape. There are short and massive jewelry, large pendants on a short chain.

All metal paints

Anchor weave looks beautiful in gold. To increase its performance properties, manufacturers mix it with other metals. The modified composition adds strength to the product and changes its color and shade:

To produce white gold, in addition to the main precious metal, silver, palladium and nickel are used.
Yellow gold is formed by combining silver and copper. The shade depends on the proportions of additional metals.
Rose gold contains copper and silver in unequal amounts. The more copper, the brighter the shade. Such products are strong and durable.
Red gold comes in different colors due to the combination of gold, copper and zinc.
The process of oxidizing gold, chromium and cobalt through chemical reactions produces black and blue gold.

Why do girls prefer anchor style?

Most girls and women love jewelry made in anchor style. They note that such accessories are practical, fashionable and stylish. Today you can choose any chain, taking into account the tastes and personal preferences of the buyer.

A large selection of jewelry allows you to experiment with looks. Anchor weave chains can be worn under any clothing and for all occasions. Many people prefer not only wearable options. Jewelry is worn as a separate accessory and complemented with crosses, pendants, medallions, icons and other pendants.

The huge selection of chain weaving is appreciated by even the most fastidious jewelry connoisseurs. Craftsmen and designers spared no time or effort for them. Today, in a simple classic connection of links you can see the imagination and unlimited possibilities of jewelers.

Anchor chain weaving is a real work of art. To make the product more durable and durable, some manufacturers mix gold with other metals and coat it with a diamond cut. Jewelry comes in different colors and shades and does not lose its significance. That's why the anchor style chain is still the most stylish and versatile piece of jewelry.

"Giotto"

Jewelry made using the Giotto technique suits women and girls very well. This is a rather unusual chain weave. The anchor clutch of large thin links shaped like rings gives the product some originality and is an ex-modification of the “Chopard” subtype. It is surprisingly weightless and airy in appearance. With such a decoration on the hand or neck, any representative of the fair sex will look rich and chic. A chain made of white gold with Giotto anchor weave also looks elegant. Silver items also have charm. The Giotto chain is one of the most durable. Even if it breaks, which is unlikely, repairing the jewelry will be quite cheap and will not take much time. Thanks to its simple structure, it is easy to care for.

The name “giotto” did not take root in Russia. Due to the similarity of chain links to curtain rings, the names “curtain” and “blinds” are readily used instead. In addition to the classical technique, there are “double giotto” and “triple giotto”.