How can you clean a silver chain from darkening and negative energy?

• Why do silver chains darken?
• How to clean silver chains
• What are the most effective means to clean a silver chain from tarnishing?
• How can you clean a silver chain from negative energy?

Nowadays, silver jewelry is very valuable. They perfectly complement any not only female, but also male image. However, over time, this metal loses its original appearance and becomes covered with a dark coating. Next, you will learn how to clean a silver chain.

Why do silver chains darken and need cleaning?

This metal has unique properties of removing and redistributing negative energy in space, so it can be used to cleanse the owner’s aura. Silver is also a good filter and antiseptic.

In addition, it can be used to contact the souls of dead people; it has magical powers. Thanks to its special shape, the chain can create a protective field around the owner.

Before you find out how you can clean a silver chain and cross, you need to understand the reasons for the formation of a black coating on silver. There are many different explanations for this phenomenon.

1. Superstitions and signs.

• Magical influence.

Popular signs say that the darkening of the chain is not good. It can be assumed that the owner of the jewelry has envious people and ill-wishers who can use black magic rituals against him. The darker the layer of plaque appears on a silver item, the more powerful the negative energy.

• Protection from evil forces.

Another sign says that silver absorbs negativity, thereby protecting a person from otherworldly influences. Perhaps it is thanks to the decoration that its owner avoids serious trouble or failure.

1. Health problems.

Silver can also turn black due to illness of the owner. There is even a scientific explanation for the phenomenon. The metal becomes covered with a dark coating during a chemical oxidation reaction when interacting with human sweat. In addition, perspiration mixes with the secretion of the sebaceous glands, which only speeds up the process.

If a person's sweating is within normal limits, then he will not notice significant changes in the appearance of the silver chain. An excessive process may indicate a disease (hormonal imbalance, problems with the endocrine system) and leads to rapid darkening of the metal.

1. Scientific factors.

• Interaction with sulfur-containing compounds.

Silver reacts with hydrogen sulfide in an oxygen-rich environment, resulting in an oxidation process. It leads to the formation of silver sulfide, which changes the color of the metal.

• Stressful situations, sports.

The work of the sebaceous and sweat glands is associated with a wide variety of life situations, but most often the reason for their activation is performing exercises with physical activity. It is strongly recommended to remove the chain before playing sports at home, on the street or in the gym to ensure the safety of its appearance.

• Wet air.

Experts at the Witch's Happiness store recommend:

Silver chain (snake weave) 925 sterling, length 45, 50, 55 cm

From 1990

more details

Silver chain (Bismarck weave) 925 sterling silver, 45, 50, 55 cm

From 4990

more details

Silver pendant “Mother Earth” Silver, amethyst, 3.8 cm

6 190 ₽

buy

You should not be surprised that silver jewelry has darkened if you wore it during rain or in a sauna. Increased air humidity leads to a slowdown in sweating, as a result of which the concentration of salts on the surface of the human body increases, leading to metal oxidation.

• Low silver standard, large amount of impurities.

The lower the standard, the faster the metal becomes covered with a black coating and the more difficult it is to clean it. But jewelry made from 100% silver is rare in the world. In its pure form, this metal is soft and easily changes its shape. If there are many impurities in the jewelry, for example, copper, then sulfides and a dark layer are formed on the surface of the silver.

Energy cleansing – what is it and when is it needed?

Any decoration needs regular energetic cleansing. This is especially true for products with natural stones, which absorb the energy of the owner. They need to be cleaned both after another person and immediately after purchase. Inherited jewelry will require special attention. It is believed that together with inherited pearls one can take over the fate of its owner. If that's not your plan, spend your time cleaning it up.

A proven and safe method for removing negativity from genuine pearl products is using whole grains of rice. They will not damage the color or disrupt the structure of the coating. Just place the decoration in a container with rice for a day. This time will be enough for the negativity accumulated by the pearls to remain in the rice. You can use grains several times for re-cleaning, but under no circumstances for food.

Please note that you cannot clean natural pearls with salt, like many natural stones. But melt water is coming. Rinse the beads with melt water, read prayers, this will be enough to eliminate the negative.

An interesting way is to get rid of negative energy with the help of the moon. The decoration is placed on the window so that moonlight falls on the pearls and left overnight. It is believed that the celestial body takes away negative accumulations, purifying jewelry.

A non-standard option is to cleanse someone else’s energy using sound. Mantras are chanted over pearl jewelry or a bell is rung; recorded church bells are allowed to ring.

General rules for cleaning silver chains

Nowadays, jewelers create real works of art, different from each other, which differ in alloy composition and shape. Sometimes precious inserts and pendants are encrusted into silver chains. Therefore, care methods for different types of jewelry will differ. But there are also general tips on how to clean a silver chain from blackness.

1. Wash the jewelry to remove any dirt.
2. Mix water with soap shavings. Immerse the product in the solution and leave it in it for several hours.
3. Scrub the silver with a soft brush. Sometimes it happens that this step helps to clean the black deposits, and the need for the following actions disappears.
4. Do not use very hard objects such as hard brushes, sponges, etc.
5. To clean silver items, people often buy liquids and powders designed for this purpose. But it is important not to overdo it and not to apply too much special product to the metal surface. This will definitely not improve the appearance of the decoration; most likely, on the contrary, it will deteriorate. The best option would be to follow the instructions and use the volume indicated in it.
6. Work must be done with gloves that do not contain rubber or latex. The latter contain sulfur, and, as mentioned above, the reaction with it leads to oxidation and darkening of the product. A good solution would be to use nitrile gloves.
7. After cleaning, you should rinse the chain with running water at room temperature and thoroughly wipe the product with a flannel cloth to remove excess moisture from the surface.
8. Do not forget about drying the jewelry, because otherwise the silver will become covered with ugly stains.
9. You can store items in a special box, the lid of which closes tightly and leaves no gaps.
10. In certain situations, jewelry can be so dirty that it is best not to even try to clean it yourself, but to give the chain to specialists.
11. Do not wear the product around your neck for the first few days after the work. During this time, a new protective layer will appear on it, helping to maintain its original appearance.

Rules for caring for rings and earrings

To care for pearl jewelry, only warm soapy water and a brush with natural soft bristles are suitable. A good option is a baby brush for newborns or an eyeshadow applicator (clean). Do not use any other products, including those recommended on the Internet for the query “how to whiten.” This is especially true for chemically aggressive substances and abrasive powders.

Despite their apparent strength, natural pearls are capricious and require delicate care.

So, how to clean jewelry correctly? Prepare everything you need:

• convenient container for water;
• warm solution with fragrance-free laundry soap;
• soft brush;
• natural dry cloth for sanding.

Start by preparing the solution. One tablespoon of grated soap per half liter of water is enough. Immerse the jewelry in the solution for no more than 5-10 minutes, and gently brush it with a brush. Remove and dry gently with a prepared cloth. Silver earrings with pearls or a ring are usually completely cleaned after this procedure. Deteriorated pearls with traces of old dirt may need to be cleaned twice.

How to clean a silver chain: 10 best ways

Often, when jewelers sell jewelry, they take care of their safety in advance and offer to buy care devices that can be used to clean a silver chain without much effort. These can be not only special liquids, but also pastes, powders, soaps, wet wipes with a specific composition, even an ultrasonic device patented in America. Such products will not harm the product and will restore its natural shine, but it is important to follow the instructions completely.

What to do if you don’t have professional care products? You can use traditional methods and products.

1. Toothpaste or powder.

Regular toothpaste will be an excellent help. It should be white, as gel-like and colored ones can damage the product. Squeeze a little paste onto the chain and slowly rub it into the surface with a soft toothbrush. Then rinse the silver item with water and dry with a flannel cloth. Powder is a good substitute for toothpaste for cleaning a chain.

Experts at the Witch's Happiness store recommend:

Silver pendant "Khepri" Scarab, symbol of the ancient Egyptian god of the morning sun

1 990 ₽

buy

Silver chain, dense snake weaving ("snake") Volumetric weaving. Length 45, 50, 55, 60 cm

From 1990

more details

Silver chain, Korean weaving ("popcorn") Volumetric weaving. Length 45, 50, 55 cm

From 990

more details

1. Ammonia.

Is it possible to clean a silver chain with ammonia? It reacts with any oxidizing agent. The result is a chemical product that dissolves plaque: ammonium salts. Pour ammonia into water in a ratio of 10:1, soak a piece of soft cloth or gauze in the resulting liquid, and wipe the product. If the chain is too dirty, you can soak it in the solution for 10-15 minutes and then clean it. After processing, do not forget to rinse and wipe the jewelry with a soft cloth.

1. Olive oil.

This product can instantly clean silver items from black deposits. Dry the chain well with a soft cloth previously soaked in olive oil. Then wash the jewelry in soapy water, rinse and dry.

1. Lemon juice and baking soda.

Take a level teaspoon of baking soda and stir it with a drop of water until a paste forms. The chain can be cleaned with this mixture using a soft toothbrush. Then rinse and dry the product.

Articles recommended for reading:

• How to choose a talisman according to your zodiac sign
• Silver jewelry with natural stones
• How to wear an amulet, talisman and amulet correctly?

An alternative to baking soda is lemon juice or other mild abrasives, such as chalk. Lemon can be used to clean the product from serious darkening. The juice is poured into a glass container, into which the chain is placed for 15–20 minutes. A solution with citric acid is also suitable: you need to dilute one teaspoon in 100 ml of water.

1. Vinegar.

Vinegar is poured into a glass bowl and the silver jewelry is dropped into it. The length of time the chain remains in the acid should not exceed one to two hours. Then the product is washed with water and wiped with flannel. If there is practically no blackening, then you can rub the plaque with a soft cloth, previously soaked in vinegar, and thereby clean it without much difficulty.

1. Foil.

Take a small saucepan and line the bottom with foil. Then place the product in it and clean it with a solution of soda and water (in a ratio of two level teaspoons per glass). Place the dish on low heat for 5 minutes, but do not remove the decoration immediately - it should remain in the water for another 10 minutes after boiling. Don't forget to rinse and dry the chain with flannel.

1. Potato.

The liquid in which the potatoes were boiled will be useful for cleaning silver. Place the chain and water from the boiled root vegetable in a pan, wrapped with foil on the inside. Leave the decoration for 15 minutes.

You can also clean a silver item well using raw potatoes. To do this, you need to grate the fruit on a fine grater, fill it with cool water and put a chain in the resulting mass. After 10 minutes, take it out and polish it with a flannel cloth until it shines, without rinsing it in water.

1. Salt.

Mix boiling water with salt to create a highly concentrated brine solution, then dip the chain in it until the liquid cools. For a better effect, add a small piece of foil to the glass. After the work is done, rinse and dry the product.

1. Coca Cola.

You can also clean silver items from plaque using Coca-Cola. Leave the chain in the soda for one to two hours, then rinse under running water and wipe dry with a cloth. This procedure will return the silver to its original shine.

1. Hydrogen peroxide.

Many housewives are interested in whether it is possible to clean a silver chain with peroxide. In fact, the product is inexpensive, but it is no less effective than other options for getting rid of plaque. They can cause a chemical oxidation reaction on the metal surface and clean it until it shines. According to the recipe, a tablespoon of three percent peroxide is stirred into 200 ml of warm water. The decoration is left in the solution for several minutes. The chain is then washed and dried with a soft cloth.

Before soaking your jewelry in acetic, citric, or any other acid, make sure it is completely silver and free of other impurities.

Pearl necklace - proper cleaning

The classic string of pearls is based on nylon or silk. Natural threads wear out faster than mother-of-pearl beads, lose elasticity and accumulate dirt. That is why they need to be cleaned, even if visually the beads themselves do not seem dirty.

The problem is that the soap solution mentioned above as a tool without which not a single pearl cleaning can be done is not suitable for silk or nylon thread. You need to take care of strings of pearls with double diligence, dividing the process into several stages:

The first ones are enough to wipe with a cloth soaked in a soap solution, followed by treatment with a clean rag. You can clean the thread safely and conveniently in potato flour. The product is left in a container with flour for a day, after which the excess is removed and rubbed with a clean cloth.

How can you clean the energy of a silver chain?

Silver is a real amulet for a person, absorbing all the negative energy of ill-wishers. This metal releases “dirt” as easily as it absorbs it, so cleaning it is not so difficult.

• Water.

Water is the main assistant in removing negativity from silver. It makes the energy of the decoration neutral. The best way to clean metal is with water from a spring or clean stream. The chain is placed in liquid at dawn, and the owner says that he wants to charge the silver with positivity, to protect himself from enemies and envious people. The decoration should be in the water for two to four hours.

How to cleanse pearls from foreign energy. Cleaning jewelry with stones at home

polished surface becomes dull over time

Very often, the facades of houses, offices and apartments are faced with natural stone. This finish is considered durable and, with proper care, can last for decades.

But over time, the polished surface begins to lose its shine, scratches, various stains, and cracks appear. In order for natural stone cleaning to be effective and safe, it is necessary to choose the right care products.

Sunlight cleaning

The sun is the main source because it emits its own light, converting some of its nuclear energy into luminous energy. Therefore cleansing your stone from sunlight is fast and powerful, place it in the sun for a maximum of 4 hours to benefit from this energy.

Purification by moonlight

The Moon is a secondary source because it does not produce light, it returns part of what comes from the Sun to the Earth, it is called a diffusion phenomenon. Moonlight with softer effects than sunlight, you can expose the stone all night on the edge of the window.

There are 3 different cleaning methods:

1. using acids and acidic compounds;
2. combined methods;
3. sandblasting.

Cleaning natural stone using acids and acidic compounds.

• Cleaning natural stone using acids and acidic compounds is used only for outdoor work. The method is characterized by its low price and good results on moderately dirty surfaces (for example, residues of lime, mortar, and rust are well removed). Organic acids are used, as well as hydrochloric, phosphoric and others. The surface to be treated must be moistened generously with acid, previously diluted with water, and left for some time. After this, rinse with clean water. Use this method with extreme caution when cleaning marble and limestone.
• Cleaning natural stone using alkali. Used in case of heavy contamination. Has a degreasing effect. Particularly effective for removing organic contaminants, traces of dirt and soot. Suitable for limestone. Should not be used to clean rust or cement stains.
• Cleaning natural stone using pastes. Used to remove the following contaminants: mold, algae, moss, etc. Suitable for removing grease and oil stains, paint, resin. The method of application is to apply the paste to the surface to be treated for up to three days.

The more full and bright the moon is, the more it scatters sunlight, so full moon nights are recommended. On the other hand, there is no need to place the stone in a place that receives the rays of the morning sun to avoid the strong contribution of sunlight.

Cleaning with casings

Restore the scallop shell and place your stone in the center of the shell, facing north. For greater efficiency you can add. Maintaining bluestone does not require much effort. There is no need to clean the blue stone regularly. Outside weather is responsible for maintaining the bluestone. Natural stone skates under the influence of time and growth in character.

Cleaning natural stone using a combined method

Most often it is already used when the surface needs to be further cleaned by other methods. In this case, grinding is used with both mechanical abrasive and diamond tools. The main disadvantage of this method of removing contaminants is that it can cause damage to stone products.

A good annual cleaning at the end of winter is enough to keep your outdoor area bright. In the spring, clean your bluestone deck with bleach diluted with water or a natural stone product. In summer, some clear water is purified from time to time. But what do you do in case of spills or accidents? If you made a spot on the deck while enjoying the sun, no problem. It is important to immediately apply water to the stain. You can add dish detergent.

For more stubborn stains that you didn't notice right away, preserving bluestone is easy too! Even the most stubborn stains will not penetrate Belgian blue stone. There is always a solution to repair bluestone stains. Blue stone is stain resistant. Even the most stubborn stains, such as grease stains from barbecues or sunscreen, do not penetrate.

Using sandblasting method

This type of cleaning is used only for external work. With this method, contaminated surfaces are treated with special fine sand under high pressure. It is necessary to carry out cleaning away from glass, wood and plastered surfaces, as this method can lead to damage.

Clean Blue Stone: Remove Oily Stains

A relaxing day sunbathing around the pool or a family meal on the terrace? BBQ or sunscreen can leave stubborn stains.

Wine or soda stains on your bluestone terrace

• Place just happened?
• Is the accident less recent?
• Allow time for the powder to absorb the grease and then rinse.

During a family dinner, does your child accidentally knock on your blue stone terrace? No panic, soda or wine stains are easy to clean.

Repair rust stains on blue stone

As soon as you notice a stain, rinse the fabric with hydrogen peroxide diluted with water. Place a damp cloth on the stain and let it sit for a few minutes.

Saving your garden or your tools can also cause stains. A garden hose left on bluestone for too long, spilled mechanical cleaner or the use of weed control products containing ferrous sulfate can leave rust stains on your bluestone.

• always carefully read the instructions for use to avoid damage;
• start cleaning the surface from dirt with a less concentrated solution and only then with a more concentrated one;
• test the product on an inconspicuous area.

Caring for natural stone. How to clean jewelry with stones?

First of all, when caring for natural and precious stones, it is necessary to take into account their level of hardness. Stones such as diamond, sapphire, emerald, aquamarine, topaz, quartz have a high level of hardness and ordinary washing powder is quite suitable for cleaning them. The stones should be placed in an aqueous solution of washing powder for a while, and then lightly massaged with a soft brush (you can use an old toothbrush with soft bristles or a men's shaving brush). If the stones have inclusions, then you should be extremely careful, since they have a heterogeneous structure and this reduces the hardness coefficient, the stone can be damaged and chipped. If your stones are not set, then it is better to store them in soft suede or flannel bags, separately from each other.

A simple method that is especially important for thoroughly cleaning your stones, minerals that are worshiped, for example, because labradorite, which cannot be in direct contact with salt. Indirect purification of minerals. What you need is simple and inexpensive.

Hollow plate, glass, coarse salt are easy to find. Take an empty glass and simply place it on a plate. The pictured green stone you see is an emerald because it cannot safely touch the salt. Leave your minerals on for 2 or more small hours or so if you find it beneficial and finally throw away the salt that has captured the negative energies of its minerals.

Ritual with salt for all troubles

Basically, “salt” rituals are carried out in order to protect oneself from harm. Such rituals strengthen your energy shield, which makes you more resistant to life’s failures and physical ailments. This ritual is divided into three stages, which will combine the previous rituals. First, rub with salt and rinse with water, then add a pinch of salt to a glass of water and drink. Finally, pour salt into the bag while continuously saying:

“I protect myself with salt, I cleanse myself from evil. I get an invisible barrier from any evil.”

This amulet also needs to be carried with you in order to have good protection and remain untouched by troubles in the future.