Cuffs, single earrings, climbers...Top 5 trends in the world of earrings

Cuff earrings

Cuffs are earrings that do not require additional piercings. They can be attached with a clip on the cartilage or an arc around the ear, sometimes they have an additional attachment in the puncture of the earlobe.

Cuffs have been on the pages of fashion magazines for 5 years in a row. And they are not going to give up their positions. Leading brands have included ear cuffs in their 2022 collections, so if you still haven't tried wearing these unusual ear jewelry, now is the time!

Step-by-step instruction

Step-by-step instructions will tell you how to pierce your tongue correctly and almost painlessly. However, before studying it, it is important to know some rules for this mini-operation planned at home.

First you need to understand where, in what place you can pierce your tongue. Piercing is done exclusively on the tip of the tongue or strictly in its middle. If the puncture is made along the edges, then there is a high probability that the needle will get into large arteries, and it will be difficult to stop the bleeding.

If there are concerns that piercing your tongue will be painful, then you can resort to analgin or No-shpe. These drugs can make manipulation easier.

• Sterilize all instruments, including jewelry, with special products or medical alcohol.
• Rinse your mouth thoroughly using antibacterial or mild saline solutions.
• Wash your hands thoroughly with antibacterial soap, then put on sterile gloves.
• Holding your tongue with a clamp, mark the place for the puncture.
• Make a puncture with a hard movement. Using a catheter, the puncture is made from below, using a regular needle from above. Videos about how to pierce the tongue in one way or another can be found on the Internet.
• Insert the earring using a catheter or normal movement. The earring is inserted without delay, since within a few hours the wound will begin to heal and a new puncture will have to be made.
• Rinse your mouth thoroughly with an antiseptic.

Tongue piercing

Earrings along the lobe (pin earrings)

Earrings along the lobe resemble cuffs in appearance, but they are attached without additional clips or arches. Unlike traditional earrings, they have an elongated stud that goes behind the lobe, securely holding the decorative part in front along the lobe.

These earrings usually have a classic design, and are an excellent alternative to cuffs if you have sensitive ears that do not tolerate even soft clips.

What types of earrings are there?

What types of earrings are there?

• Studs Small earrings, sometimes called studs. ...
• Climbers The name of this type of earrings comes from the English word climb - “to climb”, which quite clearly describes their essence. ...
• Congo...
• Clips...
• Cuffs...
• Mono earrings…
• Chandeliers...
• Jackets

27 Jan
2022 Interesting materials:

How to remove Yandex in Firefox? How to remove language in Windows 10? How to remove hieroglyphs in Windows 10? How to remove icons in Google Chrome? How to remove a network name? How to remove a name in a folder? How to remove a name in Viber? How to remove information about a VKontakte birthday? How to remove the Hand tool in PDF? How to remove the interface in CS GO?

Jacket earrings

These are earrings that consist of two parts: a standard stud, which is attached to the earlobe, and a decorative part, which is attached behind the earlobe.

The most popular manufacturer of jackets is Jacquie Aiche. The designer suggests combining dozens of different studs with a variety of different decorative elements. And the most famous jacket earring can be called a pearl model from Dior.

Fake earrings/false piercings

Cuffs are one of the types of cuffs. Their peculiarity is that they are small in size and have a very thin attachment, which allows you to create the illusion that you are wearing a real piercing. The decoys are attached either with a simple clamp or with a spring clamp. The most current options for decoys are described in the article Top 10 fashionable piercing options.

Pseudo-plugs

These are earrings that imitate a tunnel in the lobe. The illusion of a large hole in the ear is created by two parts of the jewelry, which are attached on different sides of the ear.

The most popular options are pseudo-plugs in the shape of a kitten and a snake.

Installation Features

Installation of microdermal always occurs according to a clear schedule. The first step is to antiseptically treat the instruments and the area of ​​skin on which the jewelry will be placed. Next, the master makes an incision with a scalpel into the skin itself and an incision in two directions underneath it, separating the skin from the fatty tissue (at the place where the plate is attached).

An anchor is inserted into this hole (it is recommended to do this the first time) and the tip is screwed on to secure the decoration. After all manipulations, the piercing must be sealed with adhesive tape to prevent dirt and dust from entering.

Mismatched earrings

For 2 years in a row, the world's leading designers have been advising to deviate from the rule of wearing identical earrings, suggesting creating mixes of different earrings. Both sets of similar jewelry and a combination of earrings that are completely different in size and shape look trendy. A great option for those who often lose earrings and don’t know what to do with mismatched jewelry.

Who is it suitable for?

In order not to make a mistake in your choice, you definitely need to try it on and understand how, with the help of jewelry, you can emphasize the advantages and hide the disadvantages. You need to choose such jewelry not only based on social status, you also need to take into account the traditional way of life of a person.

How well cafs fit depends on your face shape. Any type of jewelry is suitable for an oval face. You should take a closer look at choosing ear cuffs for people with square or triangular faces. It is better to choose models for the earlobe. Long and voluminous ones can emphasize the angularity of face shapes.

It is recommended to choose cuffs with special structures of the face and neck with caution. In this case, it is better to choose discreet jewelry without drawing much attention to these parts of the body. They will stand out unfavorably against the background of the heads of miniature persons. Massive jewelry is suitable for those with large facial features.

It is also beneficial to choose earring cuffs by color. All shades of blue, purple, gold and orange are suitable for blue-eyed people. Malachite, turquoise and garnet colors will look beautiful with green and gray eyes. For dark eyes, earrings decorated with pearls, amber and rock crystal are suitable.

There is no need to choose ear cuffs that are similar in hair color, this way the earrings will remain invisible and will not have the desired effect. It is not necessary for children to undergo a painful procedure of piercing their ears. Bright, original decorations are suitable for children of any age. For older people, it is advisable to choose products made from precious metals and stones.

Mono earring

The maximum expression of unpairedness is an earring on one ear. Initially, it was proposed to wear ear cuffs on one ear. But recently, stylists advise trying to wear large chandelier earrings or earrings with long chains in one ear. If you like asymmetrical styling, why not try it? Moreover, you don’t have to buy a designer mono-earring but just take one piece of jewelry from your favorite pair.

How to do it yourself, master class

Externally, the design of cuffs may seem complicated, but this is a deceptive feeling and making them yourself is not difficult. You can make earrings from scrap materials and even from paper clips, since the thickness of such wire allows you to create jewelry, and you may not have special wire at hand.

Earring cuffs are designed in advance. The model is determined and on which ear they plan to wear it, since for some categories of people this is an important point. It is also recommended to start with simple models, since massive models are more difficult to make. Molds consisting of two layers of wire can complicate the creation process. The wire should not break anywhere.

To create, you will need materials for every taste: wire, beads, chains, feathers, pendants. Original jewelry will be created from them. Tools that will be useful are round nose pliers and pliers. With their help, the wire will be bent and cut, and loops will be created. To create a rounded shape, you can use a pen, pencil, or any round object that allows you to wrap the wire around it.

Wire cuffs

To make it you will need 13-15 cm of wire, pliers and a handle.

• Cut the required length of wire and make a loop at one end using pliers.
• Bend the wire in a zigzag pattern twice.
• Make a curl at the free end of the wire.
• Wrap the cuff around the handle.
• Make a small ring from the wire and secure it to a small curl.

Cuffs with beads

You will need 18 cm of wire, beads and pliers.

• Cut the wire, bend 5 cm and press it to the main part.
• Bend the wire again by 3 cm, forming a zigzag. On one side the zigzag protrudes by 2 cm, and on the other side by 10 cm.
• Find the middle of the zigzag and wrap the long part of the wire in 3-4 tight turns.
• Bend the short part at an angle of 45 degrees to the opposite side.
• Repeat the fold on the opposite side.

Step-by-step making of cuff earrings with your own hands.

• Place beads on both sides and make a ring on the short part of the wire.
• Bend the long part in a zigzag, the sides should be equal in size to the beads.
• Place more beads on the top of the resulting zigzag.
• Finish the zigzag with a ring made using pliers.
• Bend the free ends with a pen or pencil.

Cuffs with feathers

Prepare materials: thick wire 15 cm and thin wire, beads, 1 large feather and small feathers, chain, superglue, 5 rings for jewelry. Tools you will need: round nose pliers and pliers.

• bend the wire into the shape of an ear;
• bend the edges into rings;
• attach rings with thin wire;
• drop glue onto a large feather and attach a smaller feather to it;
• take 5 cm of thin wire and bend it into a loop at one end;
• wrap the second end of the wire around the feathers where they are glued together;
• Make 10 pieces of thin wire, each 7 cm long;
• make a loop, put on a bead, thread the last link of the chain and bend the wire;
• from the rest, do the same for the base of the feathers.

Cuffs made of polymer clay or plastic

Products made of plastic help the product remain flexible and when using these earrings, the attachment to the ear is adjustable. For this you will need: wire, black plastic, gray eye shadow and varnish.

• Fit the frame of the dragon's body and wing to the ear.
• Use plastic to mold the body frame and the wing frame.
• Connect the body and wing.
• Using a needle, cut out small parts to form a wing and fragments of the dragon.
• Using shadows, add color and shine to the future product.
• Bake in the oven for 15 minutes.
• Cover with varnish.

Thus, thanks to imagination, every woman will be able to create her own unique style with the help of cuff earrings.

Author: Rita Aleksandrovskaya